make things come alive

Blog

MK10 All M​etal Hotend Kit installation instructions

By on Nov 21, 2015 in Blog |

  Tools needed: Adjustable wrench (1 inch) Cutters Needle nose pliers 9mm wrench 5mm hex wrench 2mm hex wrench Sharpie/marker Round file ​Thermal Compound (included in kit) Preheat left and right nozzle Hold the heater block with adjustable wrench and remove the nozzle using 9mm wrench. Be careful where you are clamping with adjustable wrench, don’t damage the...

Read More

Daniel Norée’s OpenRC 3D Printed Quadcopter is a Treat for Your Eyes – 3DPrint.com

By on May 1, 2015 in Blog |

There is something about quadcopters and other man-made aerial vehicles that are just downright sexy. I’m not sure if it’s the fact that humans have been enamored with flying vehicles since even before the Wright brothers invented and built the world’s first successful airplane, or if perhaps there is something extremely challenging and adrenaline filling to the the...

Read More
3D PRINTSHOW MADRID 12—13 MARCH 2015 MADRID | BERLIN | NEW YORK | LONDON | CALIFORNIA | PARIS | DUBAI

3D PRINTSHOW MADRID 12—13 MARCH 2015 MADRID | BERLIN | NEW YORK | LONDON | CALIFORNIA | PARIS | DUBAI

By on Mar 11, 2015 in Blog, News |

3D PRINTSHOW 2015 Schedule MADRID | BERLIN | NEW YORK | LONDON | CALIFORNIA | PARIS | DUBAI MADRID 12—13 MARCH 2015 BERLIN 26—28 MARCH 2015 NEW YORK 16—19 APRIL 2015 LONDON 21—23 MAY 2015 CALIFORNIA 10—12 SEPTEMBER 2015 PARIS 16—17 OCTOBER 2015 DUBAI 08—12 NOVEMBER 2015 CONTACT 3D PRINTSHOW http://3dprintshow.com/home-cities/ 3D Printshow Limited...

Read More
Bold Machines: Margo and Mr. Walthersnap

Bold Machines: Margo and Mr. Walthersnap

By on Oct 7, 2014 in Blog |

Bold Machines created a film treatment for a movie called Margo and have worked with artists to get the characters made, and are launching the concepts on a mission to explore the frontier of film-making by starting with 3D printed models. A good story calls for a great hero like our detective Margo, but it also requires a sinister villain. Enter Mr. Walthersnap....

Read More
INSIDE 3D PRINTING CONFERENCE & EXPO – SANTA CLARA

INSIDE 3D PRINTING CONFERENCE & EXPO – SANTA CLARA

By on Oct 6, 2014 in Blog, News |

Be a Part of The Third Industrial Revolution 57 Informational Sessions, 4 Keynotes Sessions, over 60 Speakers, and over 40 Sponsors and Exhibitors! Since its inception in 2013, the Inside 3D Printing Conference and Expo has quickly grown to become the largest professional 3D printing event worldwide. Inside 3D Printing Santa Clara will feature 57 conference sessions...

Read More
No Time for Car Shopping? Click ‘Print’ to Make Your Own By NATHAN LALIBERTE

No Time for Car Shopping? Click ‘Print’ to Make Your Own By NATHAN LALIBERTE

By on Sep 27, 2014 in Blog, News |

The Strati, a 3-D printed vehicle, made by Local Motors, at the New York Hall of Science in Flushing Meadows-Corona Park in Queens. The car’s structure combines the body and chassis in a single unit and is made entirely from a composite, acrylonitrile butadiene styrene, reinforced with carbon fiber. Commonly called A.B.S., it is the same thermoplastic used to make...

Read More
Kinematics @ Home bracelets

Kinematics @ Home bracelets

By on Aug 29, 2014 in Blog |

Kinematics is a system for 3D printing that creates complex, foldable forms composed of articulated modules. Use our free app to design your own flexible bracelets make your own at http://n-e-r-v-o-u-s.com/kinematicsHome/ download samples here: https://go-3dprint.com/product/kinematics-home-bracelets/...

Read More
Print your own Recreus sandals

Print your own Recreus sandals

By on Jul 25, 2014 in Blog |

Hello Recreusers!!! Want more ways to use Filaflex? Check out our new 3D printed sandals. Download the model here https://go-3dprint.com/product/p3010/ PRINT SETTINGS: PRINT SPEED: 50 mm/s INFILL: 10% (TRIANGLE INFILL IN CRAFTWATE IS ENOUGH) LAYER HEIGHT: 0,3mm TEMP: 235ºC SIZE CONVERSION: -Scale up or down the large size to get your size. Large size: EU UK USA...

Read More
World Maker Faire New York 2014!

World Maker Faire New York 2014!

By on Jul 9, 2014 in Blog, News |

Makers: Are you a maker in or around New York (or beyond!)? We’ll be showcasing all sorts of amazing work from makers of all kinds and ages. Submit an application to bring your project to World Maker Faire New York 2014 today! The deadline to submit an application is Sunday, July 20, by 12:00 am PDT. (And pass the word onto your maker friends!) Maker...

Read More
How to turn yourself into a 3D Printed Action Figure – The Hulk (Glow in the Dark)

How to turn yourself into a 3D Printed Action Figure – The Hulk (Glow in the Dark)

By on Jul 8, 2014 in Blog |

Here is step by step how to do a custom 3D printed figure. Step 1, Use 123 Catch or 3D Camera to catch your head and convert it to digital model. *123 Catch is a free app for mobile devices by Autodesk, allow you to take images from your phone or other devices and generate a 3D model for you. Step 2, Download the action figures you like. * you can find thousand of...

Read More
Spring Grass Cord Cable Holder Organizer‎

Spring Grass Cord Cable Holder Organizer‎

By on Jul 3, 2014 in Blog |

Print out this Cord Cable Organizer‎ and keep the green Spring Grass on your desktop! Both PLA and ABS friendly, 30% infill, 2 shells, color change from “soil” to “grass” on 50% of the printing processing. Original size 20mm x 100mm. Just simply use double sided tape to attach to your desktop and very easy to remove. Download the file from the link below for free...

Read More
Here Arrow Coat Hook

Here Arrow Coat Hook

By on Jul 2, 2014 in Blog |

Print out this here arrow coat hook to bright your wall & closet! Both PLA and ABS friendly, 10% infill, 2 shells. Original size 1X1X4. Download the file from the link below for free with Coupon code “designer14”. Enjoy! https://go-3dprint.com/product/here-arrow-coat-hook/...

Read More
Dreamer Dual Extrusion Professional Desktop 3D Printer is available now!

Dreamer Dual Extrusion Professional Desktop 3D Printer is available now!

By on Jun 25, 2014 in Blog, News |

The FLASHFORGE Dreamer is a high quality with dual extrusion technology 3D printer that provides a great learning experience to 3D printing. The FLASHFORGE Dreamer provides user experiences like no other 3D printer on the market. Features ARM Contex-M4 CPU processor, computing faster IPS material 3.5 in multi-language touchscreen LCD panel operation Self-developed...

Read More
Print this Bird feeder and Put on Window!

Print this Bird feeder and Put on Window!

By on Jun 14, 2014 in Blog |

Modern Bird house with stand, suction on window and observe bird behavior from inside out.  Great for kids and bird lover!   download the Bird Feeder – Put on Window here: https://go-3dprint.com/product/bird-feeder-put-on-window-2/...

Read More
Make & Print Strawberry and Cream Popsicles @ Home with your Kids this Summer!!!

Make & Print Strawberry and Cream Popsicles @ Home with your Kids this Summer!!!

By on May 26, 2014 in Blog |

Make Strawberry and Cream Popsicles @ home! Ingredients 2 cups strawberries, hulled and sliced 1/3 cup sugar 2 teaspoons pure vanilla extract 1 cup vanilla yogurt Directions Add the berries to a bowl and toss with the sugar and vanilla. Let sit out for 15 to 20 minutes so they get all juicy. Add to a blender or food processor, along with the yogurt, and puree until...

Read More
The new software tool now can generate “Lego” blocks from your Digital Models and print it out.

The new software tool now can generate “Lego” blocks from your Digital Models and print it out.

By on May 5, 2014 in Blog, News |

Whether you use filament or thermoplastics, the material costs for 3D printing tend to add up. In order to help the cost-conscious, and to speed up the 3D printing fabricating process, Stefanie Mueller, a PhD Student from the Human Computer Interaction Group at the Hasso-Plattner-Institute in Germany, along with her team of students, has developed a software tool...

Read More
Ikea Lampan Hack

Ikea Lampan Hack

By on Apr 10, 2014 in Blog |

  During the Eindhoven Mini Maker Faire visitors made amazing designs for the Ikea Lampan lampshade. Drawing their designs in 2d on a piece of paper an interactive installation transformed their ideas live into a 3d model. Lots of pretty drawings were made and we want to share them with you! So get yourself an Ikea Lampan and start hacking!...

Read More
Winged Victory of Samothrace (3d Printed, 50 hours)

Winged Victory of Samothrace (3d Printed, 50 hours)

By on Apr 8, 2014 in Blog |

  The Winged Victory of Samothrace, also called the Nike of Samothrace, is a 2nd-century BC marble sculpture of the Greek goddess Nike (Victory). Since 1884, it has been prominently displayed at the Louvre and is one of the most celebrated sculptures in the world. H.W. Janson described it as “the greatest masterpiece of Hellenistic sculpture.” The Nike...

Read More
Puppy toy by Eero Aarnio

Puppy toy by Eero Aarnio

By on Apr 2, 2014 in Blog |

Eero Aarnio (born 21 July 1932 in Helsinki) is a Finnish interior designer, noted for his innovative furniture designs in the 1960s, such as his plastic and fibreglass chairs.[1] Puppy toy by Eero Aarnio at the Googleplex, 2008 Aarnio studied at the Institute of Industrial Arts in Helsinki, and started his own office in 1962. The following year, he introduced his...

Read More

Use code "MAT17" to save 10% on all Materials and Accessories Dismiss