Let me start off by saying this is a very easy print/make... The handle only has two main prints and you have the option of printing either 6 individual sliding cylinders or print one with all of them already embedded... Every print can be printed on a single extruder, no print requires any supports, and the tallest print is 155mm high on the Z axis... So as long as your printer can print 155 in the Z, you can make this no problem... ’0; ’0;The only thing you will need to buy is this LED light and remote for $10.... http://www.amazon.com/gp/product/B00FS7N0J8?psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s00 I used Bendlay filament for the cylinders mostly because it lets a lot of light pass through is (91%) and it is also a lot stronger than PLA... It is pretty expensive, but totally worth it for this project... If you desire, you can also print the cylinders in natural PLA/ABS or any translucent filament you want to use... However, you wont get the same glow you get with Bendlay... Here's a link to Bendlay... https://go-3dprint.com/product-category/layfilaments/ ’0; Here's an Instructables I made on the details on how to make the light saber... http://www.instructables.com/id/3D-Printed-LED-LIGHTSABER/ ’0;Here is an instructional video I made that basically goes over everything that I'll go over in this Instructable... By downloading this thing, you agree to abide by the license: Creative Commons - Attribution - Share Alike
