0.25kg of 1.75mm LAYWOO-D3 wood filament, coiled and ready-to-use for 3D Printing. You can print the filament in a range from 175°C to 250°C. Printing at lower temperatures will produce a brighter color while printing at higher temperatures will create a darker print. The printed wood will appear rough, similar to MDF (Medium-Density Fiberboard). Playing a little with the material feed settings brings more craters or a smoother surface. Features - Coiled and sealed in transparent stand up plastic bag - Very little warp - Rough or smooth surface possible during one print - Paintable, grindable, carvable and stainable - Printable tree-rings - No heated bed necessary - Contains recycled wood and harmless binding polymers (still, we don't recommend ingesting) - Similar thermal durability as PLA - No need to store in a sealed bag or use desiccant (wood loves humidity) Printing Tips At print temperature LAYWOO-D3 is less viscous than PLA or ABS, a few extra steps can help improve your printing experience: - Adding extra extrusion to the beginning of your print will help prevent dry extrusion during the initial layers. - Increasing the retraction setting of your part during slicing will reduce 'leakage' while the hotend is moving between sections (especially over open areas). LAYWOO-D3 will harden over time, for delicate parts allow 30-60 min for your print to set. Alternating the temperature during your print (even by as little as 10 degrees) will vary the coloration, giving it a 'grained' look.
